Jump to content


Photo

[GUIDE] How to properly set up Windows Server 2012 on a CF-Card


  • Please log in to reply
55 replies to this topic

#41 hasticus

hasticus

    Beginner

  • Members
  • 5 posts

Posted 09 October 2017 - 06:25 AM

If you get the message ”Successfully applied image” after the image process and then ”Boot files successfully created” after you run bcdboot, your computer should be able to boot with CF. If not you probably have wrong boot order or a incompatible CF-card.

Can you explain, is it possible situation, then I can write files to CF card but it is not possible to boot from it? Which CF cards are recommended or preferable?



#42 Marcin_gps

Marcin_gps

    JPLAY team

  • Administrators
  • 3,494 posts

Posted 09 October 2017 - 08:21 AM

I have good experience with Apacer and Lexar. I heard that Transcend is also nice. 


JPLAY & JCAT Founder


JPLAY FEMTO: a complete network music software player for the most demanding audiophile.

Want to squeeze more from your PC-audio? Hear the difference with JCAT

#43 Tomslin

Tomslin

    Die Hard

  • Members
  • PipPipPip
  • 292 posts
  • LocationSweden

Posted 09 October 2017 - 03:35 PM

Can you explain, is it possible situation, then I can write files to CF card but it is not possible to boot from it? Which CF cards are recommended or preferable?

 

Yes, it’s possible. All CF cards are writable, bootable is something else. And not all kind of CF cards can be bootable. Industrial SLC type of small size, ie 16GB will be best. If you look at my signature you will se that I use KingSpec card. It’s relative cheap, fast and very good sounding, at least as good as much more expensive Apacer.

 

 

I have good experience with Apacer and Lexar. I heard that Transcend is also nice. 

 

 

The only experience I have is that the KingSpec I'm using now sounds better than the Apacer CF6 I used earlier.


AudioPC: Intel S1200V3RPS, Intel Xeon E3-1230LV3, Apacer AP2GITETLQ1K3 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC, JCAT USB Card Femto,
JCAT Reference SATA Cable, JCAT Net Card Femto

ControlPC: Intel S1200KPR, Intel Xeon E3-1265L V2, Apacer 75.A83EE.G000C 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC (for Windows), SATA to CF Adapter with Apacer AP-CF016GRAFS-NR (for WAV-files),

JCAT Reference SATA Cable, JCAT Net Card Femto, JCAT Signature LAN Cable

Software: Windows Server 2019 Standard, Total Commander 9.21a, JPLAY 7 Femto, Audiophile Optimizer 3.00, Upplay 1.4.1

Audio equipment: JCAT Reference USB Cable, Harmony Design Pre 906, Moon Audio Silver Dragon V3 with Furutech Rhodium XLR, Sennheiser HD800


#44 Marcin_gps

Marcin_gps

    JPLAY team

  • Administrators
  • 3,494 posts

Posted 09 October 2017 - 04:37 PM

Yes, it’s possible. All CF cards are writable, bootable is something else. And not all kind of CF cards can be bootable. Industrial SLC type of small size, ie 16GB will be best. If you look at my signature you will se that I use KingSpec card. It’s relative cheap, fast and very good sounding, at least as good as much more expensive Apacer.

 

 

 

 

The only experience I have is that the KingSpec I'm using now sounds better than the Apacer CF6 I used earlier.

Same capacity as Apacer? 


JPLAY & JCAT Founder


JPLAY FEMTO: a complete network music software player for the most demanding audiophile.

Want to squeeze more from your PC-audio? Hear the difference with JCAT

#45 Tomslin

Tomslin

    Die Hard

  • Members
  • PipPipPip
  • 292 posts
  • LocationSweden

Posted 09 October 2017 - 05:19 PM

Same capacity as Apacer? 

 

Yes, 16GB. It would be very interesting if you could make a comparison.


  • Marcin_gps likes this

AudioPC: Intel S1200V3RPS, Intel Xeon E3-1230LV3, Apacer AP2GITETLQ1K3 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC, JCAT USB Card Femto,
JCAT Reference SATA Cable, JCAT Net Card Femto

ControlPC: Intel S1200KPR, Intel Xeon E3-1265L V2, Apacer 75.A83EE.G000C 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC (for Windows), SATA to CF Adapter with Apacer AP-CF016GRAFS-NR (for WAV-files),

JCAT Reference SATA Cable, JCAT Net Card Femto, JCAT Signature LAN Cable

Software: Windows Server 2019 Standard, Total Commander 9.21a, JPLAY 7 Femto, Audiophile Optimizer 3.00, Upplay 1.4.1

Audio equipment: JCAT Reference USB Cable, Harmony Design Pre 906, Moon Audio Silver Dragon V3 with Furutech Rhodium XLR, Sennheiser HD800


#46 camel

camel

    Beginner

  • Members
  • 13 posts

Posted 09 October 2017 - 07:38 PM

Yes, 16GB. It would be very interesting if you could make a comparison.

Apacer CF6 standard or Industrial Grade?



#47 Tomslin

Tomslin

    Die Hard

  • Members
  • PipPipPip
  • 292 posts
  • LocationSweden

Posted 09 October 2017 - 07:50 PM

Apacer CF6 standard or Industrial Grade?

 

http://industrial.ap...trial-CF6-(SLC)


AudioPC: Intel S1200V3RPS, Intel Xeon E3-1230LV3, Apacer AP2GITETLQ1K3 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC, JCAT USB Card Femto,
JCAT Reference SATA Cable, JCAT Net Card Femto

ControlPC: Intel S1200KPR, Intel Xeon E3-1265L V2, Apacer 75.A83EE.G000C 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC (for Windows), SATA to CF Adapter with Apacer AP-CF016GRAFS-NR (for WAV-files),

JCAT Reference SATA Cable, JCAT Net Card Femto, JCAT Signature LAN Cable

Software: Windows Server 2019 Standard, Total Commander 9.21a, JPLAY 7 Femto, Audiophile Optimizer 3.00, Upplay 1.4.1

Audio equipment: JCAT Reference USB Cable, Harmony Design Pre 906, Moon Audio Silver Dragon V3 with Furutech Rhodium XLR, Sennheiser HD800


#48 jma6

jma6

    Beginner

  • Members
  • 24 posts

Posted 05 November 2017 - 07:25 AM

Do you have a link to purchase Kingspec cf sac cards.
Every link on internet I tried seems to indicate they are discontinued .

#49 Tomslin

Tomslin

    Die Hard

  • Members
  • PipPipPip
  • 292 posts
  • LocationSweden

Posted 05 November 2017 - 11:18 AM

Unfortunately I’ve also noticed that. I found this ebay seller but I'm not sure if that's right type of card. Maybe you can ask about the type designation.


AudioPC: Intel S1200V3RPS, Intel Xeon E3-1230LV3, Apacer AP2GITETLQ1K3 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC, JCAT USB Card Femto,
JCAT Reference SATA Cable, JCAT Net Card Femto

ControlPC: Intel S1200KPR, Intel Xeon E3-1265L V2, Apacer 75.A83EE.G000C 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC (for Windows), SATA to CF Adapter with Apacer AP-CF016GRAFS-NR (for WAV-files),

JCAT Reference SATA Cable, JCAT Net Card Femto, JCAT Signature LAN Cable

Software: Windows Server 2019 Standard, Total Commander 9.21a, JPLAY 7 Femto, Audiophile Optimizer 3.00, Upplay 1.4.1

Audio equipment: JCAT Reference USB Cable, Harmony Design Pre 906, Moon Audio Silver Dragon V3 with Furutech Rhodium XLR, Sennheiser HD800


#50 jma6

jma6

    Beginner

  • Members
  • 24 posts

Posted 06 November 2017 - 12:13 AM

Thank for this. However very confusing as in the spec they name the card CF MLC and later they indicate nand slc as memory chip ...

#51 sebna

sebna

    Beginner

  • Members
  • 15 posts

Posted 26 November 2017 - 07:24 AM

Is It still the case that those will only work with H87 or older chipsets?

 

Thanks



#52 Tomslin

Tomslin

    Die Hard

  • Members
  • PipPipPip
  • 292 posts
  • LocationSweden

Posted 26 November 2017 - 09:58 AM

No, and has probably never been.


AudioPC: Intel S1200V3RPS, Intel Xeon E3-1230LV3, Apacer AP2GITETLQ1K3 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC, JCAT USB Card Femto,
JCAT Reference SATA Cable, JCAT Net Card Femto

ControlPC: Intel S1200KPR, Intel Xeon E3-1265L V2, Apacer 75.A83EE.G000C 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC (for Windows), SATA to CF Adapter with Apacer AP-CF016GRAFS-NR (for WAV-files),

JCAT Reference SATA Cable, JCAT Net Card Femto, JCAT Signature LAN Cable

Software: Windows Server 2019 Standard, Total Commander 9.21a, JPLAY 7 Femto, Audiophile Optimizer 3.00, Upplay 1.4.1

Audio equipment: JCAT Reference USB Cable, Harmony Design Pre 906, Moon Audio Silver Dragon V3 with Furutech Rhodium XLR, Sennheiser HD800


#53 sebna

sebna

    Beginner

  • Members
  • 15 posts

Posted 26 November 2017 - 11:49 AM

No, and has probably never been.

 

Well I have two of them and I can assure you they certainly do not work with Haswell chipsets (97 generation)...



#54 Tomslin

Tomslin

    Die Hard

  • Members
  • PipPipPip
  • 292 posts
  • LocationSweden

Posted 26 November 2017 - 03:40 PM

Two of what? Do you talk about CF card or CF-SATA adapters?


AudioPC: Intel S1200V3RPS, Intel Xeon E3-1230LV3, Apacer AP2GITETLQ1K3 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC, JCAT USB Card Femto,
JCAT Reference SATA Cable, JCAT Net Card Femto

ControlPC: Intel S1200KPR, Intel Xeon E3-1265L V2, Apacer 75.A83EE.G000C 4GB DDR3 1066 ECC DIMM,

SATA to CF Adapter with Apacer AP-CF016GRANS-ETNRC (for Windows), SATA to CF Adapter with Apacer AP-CF016GRAFS-NR (for WAV-files),

JCAT Reference SATA Cable, JCAT Net Card Femto, JCAT Signature LAN Cable

Software: Windows Server 2019 Standard, Total Commander 9.21a, JPLAY 7 Femto, Audiophile Optimizer 3.00, Upplay 1.4.1

Audio equipment: JCAT Reference USB Cable, Harmony Design Pre 906, Moon Audio Silver Dragon V3 with Furutech Rhodium XLR, Sennheiser HD800


#55 sebna

sebna

    Beginner

  • Members
  • 15 posts

Posted 29 November 2017 - 09:02 PM

Two of what? Do you talk about CF card or CF-SATA adapters?

And what do you think? Of course CF-SATA adapters.



#56 Menace

Menace

    Beginner

  • Members
  • 25 posts
  • LocationMelbourne

Posted 03 July 2018 - 09:40 AM

Is there any modification to the steps required to install server 2016 in core mode?






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users